Excavators, wheel loaders, dozers, backhoes, skid steers, compact track loaders and telehandlers. A down machine holds up the whole crew, so we come to the site.
Call (855) 450-1212Request a quote| Machine | Common problems we fix |
|---|---|
| Excavators and mini excavators | Slow boom, arm or bucket, swing motor and swing bearing problems, travel motor and final drive leaks, pilot control faults, hose failures |
| Wheel loaders | Lift and tilt problems, powershift transmission faults, axle and brake issues, steering, engine and emissions faults |
| Dozers | Undercarriage wear, final drives, steering clutches or hydrostatic drive, blade hydraulics, cooling |
| Backhoe loaders | Loader and backhoe hydraulics, swing cylinders, outriggers, shuttle transmission, pins and bushings |
| Skid steers and compact track loaders | Hydrostatic drive loss, drive motors, chain cases, tracks and rollers, quick attach, safety interlock faults |
| Telehandlers | Boom extend and lift, leveling, steering modes, load moment system faults, transmission |
Moving a 20-ton excavator to a shop means a lowboy, permits in some cases, and days of downtime. Most hydraulic, electrical, engine-side and wear-part repairs can be done on site with a service truck, which is why we start there. When a component has to come out, such as a final drive, a swing motor or a transmission, we can still often pull it on site and send only the component to the shop.
Seals and many final drive repairs can be started on site; a rebuild is usually done in the shop. Often we remove the final drive on site and send only the component, so the machine does not have to be hauled.
Common causes are a drive chain or sprocket in the chain case, a drive motor, a hydrostatic pump problem, or a control or interlock fault. The mechanic checks the simple causes first, then pressure tests.
Yes. Contractors with several machines can set up an account so dispatch already has the machine list, the site addresses and the billing details.
Written up from real calls to our dispatch line. Names, phone numbers and exact locations are left out.
When a Volvo D13 engine starts up, runs for roughly two minutes, and then dies, it is usually caused by fuel starvation or air entering the fuel supply system. A broken or cracked diesel fuel line allows air to get drawn into the low-pressure fuel circuit, re…
When a Volvo VNL with a D13 engine throws or snaps a serpentine belt, simply slapping on a replacement belt will usually result in another shredded belt within miles. The most common cause is a failing belt tensioner or idler pulley assembly. Over time, inter…
When an automatic Freightliner Cascadia displays a neutral lockout warning on the dash and refuses to crank despite showing 14 volts on the battery gauge, the starter motor is usually the primary suspect. On automated manual transmissions, the control module …
HydraulicsPumps, cylinders, hoses, valves and contamination: diagnosed with gauges, not guesses.
Transmissions & final drivesPowershift, IVT/CVT, hydrostatic drives, axles and final drives.
Field weldingCracked buckets, booms, frames and hitches welded where the machine stands.123 Tractor & Equipment Repair is a service of MTS Mobile Truck Repair Service LLC, dispatching mobile mechanics, heavy-duty shops and wreckers across the United States and Canada, 24/7. · (855) 450-1212 · Request a quote · Local numbers · Real calls · mtstruckservice.com
Brand names on this site are used only to describe the equipment we work on. We are an independent service, not a dealer, and are not affiliated with or endorsed by any equipment manufacturer.