123 TRACTOR & EQUIPMENT REPAIR(916) 756-2327 · Field service 24/7

Why is my 2020 International Cummins showing an intake manifold pressure sensor low voltage code?

2020 International Cummins · Hollister, CA · CA-152 · 2026-11

Call (916) 756-2327Request a quote

What was reported

["intake manifold pressure sensor fault","sensor low voltage code","intake manifold pressure sensor short circuit"]

Our answer

An intake manifold pressure sensor low voltage or short circuit fault code on a 2020 International with a Cummins engine typically points to an electrical issue in the sensor circuit or an internal failure of the sensor itself. When the engine control module detects voltage below the expected range, it suspects either a short to ground in the signal wire, a loss of the 5-volt reference power, or a shorted internal sensor element.

Before replacing parts, a driver can inspect the sensor connector located on the intake manifold for loose latching, bent pins, moisture, or soot buildup. Check the wiring harness running to the sensor for chafing, pinched wires, or heat damage.

If visual checks do not reveal loose or damaged wiring, a technician will need to test the circuit using a multimeter or diagnostic software. They will verify 5-volt reference power and ground supply at the harness connector, and measure signal return voltage. If wiring and reference voltage test normal, replacing the intake manifold pressure sensor will resolve the fault and restore proper engine performance.

What the technician found

Fault code read showed intake manifold pressure sensor low voltage or short circuit. Replacement sensor was needed but dealer was closed.

How it ended

parts needed

More real calls

Written up from real calls to our dispatch line. Names, phone numbers and exact locations are left out.

Why won't my 1999 Volvo semi truck start back up after I turned off the engine?

1999 Volvo · San Carlos, CA · 2026-11

When a 1999 Volvo semi truck refuses to start after being turned off, the issue usually stems from electrical power loss, starter circuit failure, or fuel delivery issues. On older Volvos, a common culprit is weak or discharged batteries that lack the crankin…

Why is my truck leaking oil and displaying a low oil light right after an oil service?

Standish, CA · 2026-11

When a heavy-duty diesel truck develops a sudden oil leak right after an oil service, the most common culprit is a damaged, misseated, or double-gasketed oil filter seal. Another frequent issue is an improperly torqued oil filter housing cover, a cracked filt…

Why won't my Volvo semi truck crank or start at a truck stop?

Volvo · Lodi, CA · 2026-11

When a Volvo semi truck fails to start, the most common issues trace back to the starter motor, starter solenoid, battery voltage, or high-resistance electrical connections. A driver can start by checking the batteries to ensure they are providing sufficient …

Why did my 2020 Freightliner Cascadia DD15 shut down for low oil pressure when the oil level is full?

2020 Freightliner Cascadia DD15 · Glendora, CA · 2026-11

When a 2020 Freightliner Cascadia with a Detroit DD15 engine experiences an automatic engine shutdown for low oil pressure while the dipstick shows oil level is full, the issue is frequently electrical or sensor-related, though mechanical failure must be rule…

Why is my 2020 Freightliner with a Detroit engine showing a low oil pressure warning when the oil level is full?

2020 Freightliner Detroit · Glendora, CA · 2026-11

When a 2020 Freightliner equipped with a Detroit engine displays a low oil pressure light or fault code despite having full oil on the dipstick, the issue is often electrical or mechanical within the oiling system. The most common cause is a failing oil press…

All real calls

123 Tractor & Equipment Repair is a service of MTS Mobile Truck Repair Service LLC, dispatching mobile mechanics, heavy-duty shops and wreckers across the United States and Canada, 24/7. · (916) 756-2327 · Request a quote · Local numbers · Real calls · mtstruckservice.com

Brand names on this site are used only to describe the equipment we work on. We are an independent service, not a dealer, and are not affiliated with or endorsed by any equipment manufacturer.

Call (916) 756-2327Quote